Accessories and components for Hach, Thornton and Mettler Toledo Thornton in line water quality meters.
The Flow Sensor module for the sc200 is a user installed module that allows connection of flow meters to the controller. This module will work with analog flow sensors and is specifically built to be used with the flow paddle wheel sensor and the ultrasonic flow sensor. See manual for additional connection information.
Calibration Verification Kit for CL17 online Chlorine Analyzer.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA® l applications in the United States.
DPD is an indicator that is used to measure either Free Chlorine or Total Chlorine with the CL17 Analyzer. Depending upon whether Free Chlorine or Total Chlorine is being measured, the DPD indicator is added to Free Chlorine (2314011) or Total Chlorine (2263411) Indicator Solution, and used with Free (231411) or Total (2263511) Buffer Solution by the CL17 Analyzer.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
CL17 Free Chlorine Buffer Solution. Use with Free Chlorine Indicator Solution (2314011) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
CL17 Free Chlorine Indicator Solution. Use with Free Chlorine Buffer Solution (2314111) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
General Purpose Inline Process ORP Sensor with Integrated Digital Electronics for "Plug and Play" with Hach sc Digital Controllers - Platinum ORP Electrode, PEEK Housing, Convertible Mount, 10m Cable.
Flow Meter with Valve, 20 to 300 mL/minute. 1/4" Outside Diameter tubing.
Hach's GLI Digital Gateway is designed to convert analog differential pH/ORP sensors to digital output, for connecting to sc digital controller. This field-proven technique uses three electrodes instead of the two normally used in conventional pH sensors. Process and reference electrodes measure the pH differentially with respect to a third ground electrode. The end result is unsurpassed measurement.
Myron L CS-14 module is used to calibrate Myron L 750 series resistivity monitors/controllers. The CS-14 offers 2 megohms of resistivity. Myron L NIST traceable. Calibration Modules are commonly used to verify and calibrate Resistivity Monitor/controllers.
