ph/ORP sensors for Mettler Toledo Thornton, Hach and Myron L in-line transmitters.
Clean Water Inline Process pH Sensor with Integrated Digital Electronics for "Plug and Play" with Hach sc Digital Controllers - Glass pH Electrode, Ryton Housing, Convertible Mount, 10m Cable. This field-proven technique uses three electrodes instead of the two normally used in conventional pH sensors. Process and reference electrodes measure the pH differentially with respect to a third ground electrode. The end result is unsurpassed measurement accuracy, reduced reference junction potential, and elimination of sensor ground loops. These process pH sensors provide greater reliability, resulting in less downtime and maintenance.
General Purpose Inline Process pH Sensor with Integrated Digital Electronics for "Plug and Play" with Hach sc Digital Controllers - Glass pH Electrode, Stainless Housing, Immersion Mount, 10m Cable. This field-proven technique uses three electrodes instead of the two normally used in conventional pH sensors. Process and reference electrodes measure the pH differentially with respect to a third ground electrode. The end result is unsurpassed measurement accuracy, reduced reference junction potential, and elimination of sensor ground loops. These process pH sensors provide greater reliability, resulting in less downtime and maintenance.
The Mettler-Toledo Thornton pHure Sensor Liquid Electrolyte (LE) For M300, M800 and M300 ISM uses free flowing liquid electrolyte to provide the most accurate pH measurement available in pure waters. The electrode includes a special pH glass membrane, an integral, fast-responding temperature sensor, and AK9 or VP cable connections. All components of the pHure Sensor LE have been optimized for low conductivity performance and value and conform to ASTM Standard D5128. Various lengths of cable can be selected to provide flexibility in locating the sensor.
General use pH Sensor, w/ISM, MT 52005374, 0-14pH
Mettler Toledo's easySense ORP 41 sensor was designed using long-standing expertise in process analytics. The easySense ORP sensor problem-solves for basic applications. ORP measurement often requires skilled personnel in order to maintain and calibrate the sensors, but easySense ORP sensors are pre-calibrated, with no specialist knowledge required for sensor replacement at the measurement point.
Mettler Toledo's easySense pH 32 sensor was designed using long-standing expertise in process analytics. The easySense pH sensors are problem-solvers for basic applications. pH measurement often requires skilled personnel in order to maintain and calibrate the sensors, but easySense pH sensors are pre-calibrated, with no specialist knowledge required for sensor replacement at the measurement point.
Mettler Toledo's Thornton detachable pH sensors have an electrical connector directly on the electrode body to allow convenient maintenance and calibration. A variety of housings are available. pH sensors are compatible with M300 meters.
Myron L O74FR sensors are oxidation reduction potential, or ORP (REDOX). These sensors are combination ORP/reference, designed to operate exclusively with the Myron L Company 720 Series II pH and ORP Monitor/controllers. Each sensor has a uniquely designed, built-in isolated preamplifier that guarantees accurate and reliable measurements — completely eliminating ground-loops and noise issues. The preamp allows for longer distances between the sensor and our Monitor/controller without the loss of accuracy or reliability due to cable capacitance, resistance, or noise.
Myron L P72 series sensors are pH/reference, designed to operate exclusively with the Myron L Company 720 Series II pH Monitor/controllers. Each sensor has a uniquely designed, built-in isolated preamplifier that guarantees accurate and reliable measurements — completely eliminating ground-loops and noise issues. The preamp allows for longer distances between the sensor and our monitor/controller without the loss of accuracy or reliability due to cable capacitance, resistance, or noise. All pH sensors include a built-in temperature sensor for automatic temperature compensation (TC). The TC may be disabled, requirements per USP, or if a separate temperature device is required for your SCADA system.
