Ionpure LX CEDI Modules

See All Ionpure® Continuous Electrodeionization (CEDI) Products

Continuous high-purity water without chemicals

is the minimum order quantity for this product. Please check quantity and add to cart again.

Discontinued product

Continuous high-purity water without chemicals

Discontinued product

Description

The IONPURE® LX range of CEDI modules are specifically designed to provide ultra pure water for a wide range of industries including power, pharmaceutical, food and beverage and laboratory applications.

The LX range can be used as a direct replacement for Suez's E-Cell® EDI Modules with minimal retrofit efforts. The LX range is optimized to provide equal or better performance with IONPURE'S proven reliability.

Operating Environment

Installation should be indoors with no direct sunlight and should have a maximum ambient temperature of 113°F (45°C).

Quality Assurance Standards

CE marked. Each module is factory tested to meet strict industry standards and is manufactured in an ISO 9001 and ISO 14000 quality and environmental management system.

Features

LX-MK Series Features

Direct replacement for E-Cell MK1, MK2, and MK3 stacks
Generates mixed-bed quality deionized water without the use of chemicals
No need for acid/caustic, neutralization system or exchangable DI tanks
Continuous production instead of batch, with consistent quality
Double O-ring seal guarantees leak-free operation
Superior electrical isolation
100 psi (7 bar), 113˚F (45˚C) continuous operation
Proprietary “all-filled” concentrating compartments eliminate recirculation pump and brine injection
Available for either industrial applications or pharmaceutical applications
Patented instant hot and continuous operation up to 140° F (60° C) for HT replacements

Feed Water Specifications

Feed Water Conductivity Equivalent (including CO2 and Silica): < 40 μS/cm
Feed Water Source: RO permeate
Temperature: 41° - 113°F (5 - 45°C) 41° - 140°F (5 - 60°C) - HWS Modules Only
Inlet Pressure: ≤ 100 psi (6.9 Bar)
Maximum Total Chlorine (as Cl2): < 0.02 ppm
Iron (Fe): < 0.01 ppm
Manganese (Mn): < 0.01 ppm
Sulfide (S2-): < 0.01 ppm
pH: 4 – 11
Total Hardness (as CaCO3): < 1.0 ppm
Dissolved Organics (TOC as C): < 0.5 ppm
Silica (as SiO2): < 1.0 ppm

Typical Module Performance

Operating Parameters:

Recovery: 90-95%
Pressure Drop Range at Nominal Flow: 25-37 psi (1.7-2.5 bar), 20-30 psi (1.4-2.1 bar) - HWS Modules Only
Maximum Feed Temperature: 113˚F (45˚C)
DC Voltage: 0 - 3000
DC Amperage: 1.0 - 6.0, 1.0 - 10.0 - HWS Modules¹

¹0 - 4.5 assuming existing rectifier used

Product Water Quality:

Product Resistivity > 16 megohm-cm²
Silica (SiO2) Removal 90 – 99%, depending on feed condition

² Note: Actual performance may be determined using the IP-Pro projection software available from Ionpure.